| SHEARING.
Niagara Plate
Shear - 3/16" x 10'.
Beyeler Plate Shear - 3/8" x 10'.
Peddinghaus Iron Worker - 4" x 4"
x ½".
CUTTING.
Trumpf 4000W L 6030 CO2 Laser Cutting
Center,
3/4" x 80" x 240 "plate capacity at 35"/min.
CNC Oxy Fuel/Plasma cutting system on
a 15’ x 43’ table.
CNC OXY-Fuel/Plasma (Hypertherm HT 4001
Cutting System) on a 12' x 43' table.
Versagraph 3500 DH CNC Oxy – Fuel/Gas
cutting m/c on a 9’ x 26’ table.
Hyd-Mech M16-A Horizontal Bandsaw, 16"
x
25" capacity with fully automatic feeds.
Hyd-Mech S-20A Cut-off saw. Fully automatic
and programmable.
ROLLING.
Biko Four-Roller Double Initial Pinch Roll,
2-3/16" thk. plate x 10' capacity, CNC.
Niagara Initial Pinch Roll - 3/16"
x 6'.
Pullmax Section Roll - 5" x 5"
x 1/2".
FORMING.
Trumpf TrumaBend C110 Press Brake,
120
Ton x 10' with DA-619 controls.
Cincinnati 600H Press Brake, 600 Ton x 16' with
NC controlled back gauge.
Edwards-Pearson PR10 400/4 Press Brake,
400 metric ton x 14' CNC.
Pearson Press Brake - 170 Ton x 14’.
Arbor Press - 40 Ton.
WELDERS.
Sub Arc Welders.
1 - Dual 600 Amp with 12’ x 12’ manipulator.
3 - 750 Amp with 6’ x 6’ manipulators.
1 - 650 Amp with 12’ x 12’ manipulator.
1 - 600 Amp with 7’ x 7’ manipulator.
Robotic Welder.
Miller Arc-Motion SK-2000 Robotic System
with 60" diameter turntable.
More than 60 Manual Welders including:
24 – Cannox 650 Ultra Weld.
8 – Hobart Excel Arc.
Hobart 351 Pulse Mig.
HANDLING AND MISCELLANEOUS
Overhead Cranes – 18’ to 20’ Hook to Floor.
1 - 25 ton, 1 - 15 ton, 6 - 10 ton,
1 - 7-1/2 ton, 3 - 5 ton, 1 - 2 ton.
Fork Lifts - 5,000 to 20,000 lb.
|
MACHINE
TOOLS.
Haas VF9/50T Vertical Machining Centre,
36" x 84" table, 30HP spindle motor, 20-tool automatic
changer. Table capacity 4000 lb.
Kitamura M5-13 CNC Machining Centre with FANUC 11M Control,
30 tool capacity, 44" longitudinal travel, 22" cross
travel, 22" vertical travel, 29" table to spindle and
a 20HP spindle motor. Table capacity 2200 lb.
Toshiba Horizontal Boring Mill, Model BF-130B NC, 5.12"
spindle, 79" x 79" table with 59" horizontal travel,
354" column horizontal travel, 138" vertical spindle
travel, 39" spindle extension.
2-Toshiba 5-axis CNC Horizontal Boring Mill, Model #BTS-100W,
4" spindle, 59.1" horizontal x 39.4" vertical travel,
automatic rotary table with 5° indexing, CNC axis control for
X, Y, Z, W and B motions and 15hp spindle motor.
Union Horizontal Boring Mill, floor type, Model #BFP 160,
6.3" spindle, 13' x 11' 6" table, 98" x 79"
rotary table, 116" vertical travel and 260" horizontal
travel.
Olympia CNC Horizontal Boring Mill,5" spindle, 63"
x 49" table with 118" horizontal travel, 39" column
in/out travel, 63" vertical spindle travel, 28" spindle
extension.
Union Horizontal Boring Mill, Model #BFT 110/6, 4.5"
spindle, 77" horizontal travel x 50" vertical, 49"
x 55" rotary table complete with Heidenhain TNC 124 control.
King Vertical Boring Mill, 126" swing, 120" table,
and 90" under the rail. Digital readout.
King Vertical Boring Mill, 47" swing, 42" table,
50" under the rail. Digital readout.
Scheiss CNC Vertical Boring Mill, 78.7" swing, 59"
turning height, 63" dia. table.
Bullard CNC Vertical Boring Mill, 66" maximum
swing, 56" dia. table, 45" under the rail, 2 axis CNC
control and automatic tool changer.
Horizontal Mill - 36" x 44" x 42" with 3-1/8"
spindle, digital readout, outboard bearing and rotating table.
3-Universal Mills - 10" x 38" x 12".
Engine and Tool Room Lathes - Up to 32" dia. x 120"
ctr. to ctr.
Cincinnati Radial Drill with 8’ x 24’ travelling
column and 20 HP drive.
Radial Drills - 8ft., 7ft., 6ft., and 3ft.
TEST FACILITIES.
Heat treating.
Hydrostatic testing to 3000 psi. |
