| SHEARING.
Niagara
Plate Shear - 3/16" x 10'.
Beyeler Plate Shear - 3/8"
x 10'.
Peddinghaus Iron Worker - 4"
x 4" x ½".
CUTTING.
Trumpf 4000W L 6030 CO2 Laser
Cutting Center,
3/4" x 80" x 240 "plate capacity
at 35"/min.
CNC Oxy Fuel/Plasma cutting
system on a 15’ x 43’ table.
CNC OXY-Fuel/Plasma (Hypertherm
HT 4001 Cutting System) on a 12' x 43' table.
Versagraph 3500 DH CNC Oxy
– Fuel/Gas cutting m/c on a 9’ x 26’
table.
Hyd-Mech M16-A Horizontal Bandsaw,
16" x
25" capacity with fully automatic feeds.
Hyd-Mech S-20A Cut-off saw.
Fully automatic and programmable.
ROLLING.
Biko Four-Roller Double Initial Pinch
Roll, 2-3/16" thk. plate x 10'
capacity, CNC.
Niagara Initial Pinch Roll
- 3/16" x 6'.
Pullmax Section Roll - 5"
x 5" x 1/2".
FORMING.
Trumpf TrumaBend C110 Press Brake,
120
Ton x 10' with DA-619 controls.
Cincinnati 600H Press Brake, 600 Ton
x 16' with NC controlled back gauge.
Edwards-Pearson PR10 400/4 Press Brake,
400 metric ton x 14' CNC.
Pearson Press Brake - 170 Ton
x 14’.
Arbor Press - 40 Ton.
WELDERS.
Sub Arc Welders.
1 - Dual 600 Amp with 12’ x 12’
manipulator.
3 - 750 Amp with 6’ x 6’ manipulators.
1 - 650 Amp with 12’ x 12’ manipulator.
1 - 600 Amp with 7’ x 7’ manipulator.
Robotic Welder.
Miller Arc-Motion SK-2000 Robotic
System with 60" diameter turntable.
More than 60 Manual Welders including:
24 – Cannox 650 Ultra Weld.
8 – Hobart Excel Arc.
Hobart 351 Pulse Mig.
HANDLING
AND MISCELLANEOUS
Overhead Cranes – 18’ to 20’
Hook to Floor.
1 - 25 ton, 1 - 15 ton, 6 - 10 ton,
1 - 7-1/2 ton, 3 - 5 ton, 1 - 2 ton.
Fork Lifts - 5,000 to 20,000
lb.
|
MACHINE
TOOLS.
Haas VF9/50T Vertical Machining Centre,
36" x 84" table, 30HP spindle motor,
20-tool automatic changer. Table capacity 4000
lb.
Kitamura M5-13 CNC Machining Centre with
FANUC 11M Control, 30 tool capacity, 44"
longitudinal travel, 22" cross travel,
22" vertical travel, 29" table to
spindle and a 20HP spindle motor. Table capacity
2200 lb.
Toshiba Horizontal Boring Mill, Model BF-130B
NC, 5.12" spindle, 79" x 79"
table with 59" horizontal travel, 354"
column horizontal travel, 138" vertical
spindle travel, 39" spindle extension.
2-Toshiba 5-axis CNC Horizontal Boring Mill,
Model #BTS-100W, 4" spindle,
59.1" horizontal x 39.4" vertical
travel, automatic rotary table with 5° indexing,
CNC axis control for X, Y, Z, W and B motions
and 15hp spindle motor.
Union Horizontal Boring Mill, floor type,
Model #BFP 160, 6.3" spindle,
13' x 11' 6" table, 98" x 79"
rotary table, 116" vertical travel and
260" horizontal travel.
Olympia CNC Horizontal Boring Mill,5"
spindle, 63" x 49" table with 118"
horizontal travel, 39" column in/out travel,
63" vertical spindle travel, 28" spindle
extension.
Union Horizontal Boring Mill, Model #BFT
110/6, 4.5" spindle, 77" horizontal
travel x 50" vertical, 49" x 55"
rotary table complete with Heidenhain TNC 124
control.
King Vertical Boring Mill, 126"
swing, 120" table, and 90" under the
rail. Digital readout.
King Vertical Boring Mill, 47" swing,
42" table, 50" under the rail. Digital
readout.
Scheiss CNC Vertical Boring Mill, 78.7"
swing, 59" turning height, 63" dia.
table.
Bullard CNC Vertical Boring Mill,
66" maximum swing, 56" dia. table,
45" under the rail, 2 axis CNC control
and automatic tool changer.
Horizontal Mill - 36" x 44"
x 42" with 3-1/8" spindle, digital
readout, outboard bearing and rotating table.
3-Universal Mills - 10" x 38"
x 12".
Engine and Tool Room Lathes - Up to 32"
dia. x 120" ctr. to ctr.
Cincinnati Radial Drill with 8’
x 24’ travelling column and 20 HP drive.
Radial Drills - 8ft., 7ft., 6ft.,
and 3ft.
TEST
FACILITIES.
Heat treating.
Hydrostatic testing to 3000 psi.
|
